LOAD 28 + Hindmarsh
HYBRID SITE POWER FOR AUCKLAND INTERNATIONAL AIRPORT CONSTRUCTION PROJECT
Powershift supplied a BESS paired with a generator to deliver 24/7 power to the temporary engineering office at McConnell Dowell's Auckland International Airport as part of airport upgrade works.
The challenge
Auckland International Airport was undergoing a major expansion to connect its domestic and international terminals, requiring the addition of new aircraft parking bays.
As part of the project, temporary offices were installed to accommodate more than 50 engineers. Given the airport environment and the project’s two-year duration, a reliable, low-noise power solution was essential to minimise disruption while providing consistent power to the site facilities.
What needed to be powered
- Large temporary offices to accommodate 50 engineers
The alternative
60 kVA Generator running 24/7
The solution
- Powershift supplied the LX60/125 BESS unit paired with a 60kVA generator as the charging source.
- Throughout the project, Powershift, in partnership with NES Hire locally, has consistently monitored the units and stayed in touch with the site, proving both reliability and the capability to scale as the project grows.
-
LX & MX Series
LX60/125
Portable power for everyday site needs
- Continuous
- 60kVA / 100A
- Peak
- 150kVA / 200A
- Storage
- 125kWh
The highlights
- Over NZD$99k in cost savings Through the first 9 months of operation, significant savings were made compared to operating a 24/7 generator.
- Reduced generator run time by 77%with the generator only charging the BESS for a few hours per day.
- Saved EmissionsSaved over 100t of emissions
- Reduced noiseThe hybrid setup has allowed noise interference to be significantly removed during business hours, as the generator is not operating during these times.
Project location
Auckland, INTERNATIONAL AIRPORT
Case studies
Proven on site
Ready to make the shift?
Start your hire today.
Tell us about your site and your loads, and our team will come back to you with a battery solution sized to the job. Not sure what you need or where to start? Get in touch via the General Enquiries options below and a team member will walk you through it!
GENERAL ENQUIRIES
For general enquiries, reach out through our contact form and one of our team will be in touch as soon as possible. Alternatively you can email us on info@powershift.tech or call your local team:
Australia: 1300 705 793
New Zealand: 09 872 0328,
TECHNICAL SUPPORT
Are you an existing customer needing technical and/or product support? You can email us at, support@powershift.tech. Otherwise call your local team:
Australia: 1300 038 400
New Zealand: 09 871 8585


