Off-grid solution for mains-delayed industrial build
A Powershift battery, combined with a small generator, enabled McNab to commence their industrial build on-time despite no mains connection, without the need to run a generator 24/7. The hybrid solution delivered cleaner, quieter power to the construction site, reducing both emissions and operational costs.
The challenge
There was no permanent power available in time for the construction of a large industrial distribution centre. Traditional methods would have required a generator to run 24/7, which presents challenges due to noise, cost and reliability of power.
What needed to be powered
- Offices and meeting rooms
- Lunch sheds
- Change rooms
- Ablution block
The alternative
The only alternative was a diesel generator running 24/7 (standard approach)
The solution
- Deployment of one Powershift LX 60/125 battery, coupled with a 60kVA generator – the generator only ran approximately 3 hours per day to charge up the battery and then automatically switched off.
- Powershift team was also able leveraged the battery to support the site over periods when the generator had an issue or was not re-fuelled on time – preventing outages and downtime.
-
LX & MX Series
LX60/125
Portable power for everyday site needs
- Continuous
- 60kVA / 100A
- Peak
- 150kVA / 200A
- Storage
- 125kWh
The highlights
- Delivered CO₂ SavingsOver 88 tonnes of CO₂ emissions saved.
- Quiet, Low-Emission EnergyQuiet, low-emission power, improving site working conditions while reducing operational costs.
- Maintenance ReductionSignificant maintenance reduction: only 1 × 500-hour generator service needed instead of 11 that would have otherwise been needed.
- Generator run-time Reduced by 75%Generator run-time reduced by 75%, operating only ~3 hours per day instead of continuously.
- Reduced CostsReduced operational costs due to reductions in fuel and maintenance.
- Continuous PowerContinuous power across the site, with zero outages.
Project location
Smithfield, NSW
Case studies
Proven on site
Ready to make the shift?
Start your hire today.
Tell us about your site and your loads, and our team will come back to you with a battery solution sized to the job. Not sure what you need or where to start? Get in touch via the General Enquiries options below and a team member will walk you through it!
GENERAL ENQUIRIES
For general enquiries, reach out through our contact form and one of our team will be in touch as soon as possible. Alternatively you can email us on info@powershift.tech or call your local team:
Australia: 1300 705 793
New Zealand: 09 872 0328,
TECHNICAL SUPPORT
Are you an existing customer needing technical and/or product support? You can email us at, support@powershift.tech. Otherwise call your local team:
Australia: 1300 038 400
New Zealand: 09 871 8585

